Skip to content

Automatic translation — the Portuguese version is the reference. View in Portuguese

Updated on 2026-10-03

TV link — the dashboard on the store's or office's big screen

How to open a dashboard on a TV or wall monitor with the TV link (?tv=1) — full screen, pages that rotate on their own, data that refreshes, a clock in the corner and the page filling the whole screen.

On this page (6)

Names in bold are the ones on screen.

The TV link is the dashboard link prepared to stay on a TV or wall monitor: the store following the day's sales, the factory watching production, the sales team tracking the target. Nobody needs to touch the device after opening it.

What happens when the link opens:

  • the dashboard fills the whole screen, with no menus, buttons or footer;
  • the dashboard page fits the entire screen, with no scroll bar — on any 16:9 TV (1920×1080, 1366×768…) the drawing is the same;
  • the pages rotate on their own (30 seconds on each, unless the owner changed it);
  • the data refreshes on its own (no more often than once a minute);
  • the clock and date appear in the corner, when the owner turned that option on;
  • the mouse pointer disappears after a few seconds of inactivity.
Dashboard opened from the TV link: the page filling the whole 16:9 screen, no menus, with the clock and date in the top-right corner
  1. 1. Publish the dashboard

    The TV link is the dashboard's secret link with ?tv=1 at the end. Without a published dashboard there's no link — publish first.

  2. 2. Open Share

    On the dashboard, open More actions and click share.

  3. 3. Copy the link

    On the 1 · Secret link card, in the TV link row, click copy TV link.

  4. 4. Open it on the TV

    Paste the link into the browser of the TV, of the computer connected to the monitor or of the media device. If full screen doesn't start on its own, click ⛶ Full screen once, in the bottom corner.

TV link row on the Share screen, with the copy TV link button

The TV link is the secret link

It isn't new access: whoever has the TV link has the secret link, and vice versa. Anyone who photographs the address on the screen can open the dashboard. If the link leaks, the owner generates a new one (the old one stops working immediately) — and then the TV link needs to be copied again.

What the owner can adjust#

Whoever edits the dashboard chooses, in the editor, on the Page ribbon, Layout group:

  • TV ▾ — which pages rotate, Seconds on each page, Refresh data every (min) and Show clock and date in the corner. Tooltip and drill-through pages are left out of the rotation unless the owner checks them. With a single page, the screen stays on it.
  • TV, in the devices column — a dedicated arrangement of the charts for the 16:9 big screen, without touching the desktop design. Without a TV layout, the big screen uses the desktop layout, enlarged or reduced to fit. Copy from desktop is a good starting point.

The editor walkthrough is in Layout per device and TV mode.

Whoever sets up the TV can change the behavior by adding options at the end of the link. They apply only to that TV and take precedence over what the owner configured:

Option in the linkWhat it doesExample
tv=1Turns on TV mode (already included in the TV link)…/d/abc123?tv=1
tvIntervalo=NSeconds on each page (from 10 to 600)&tvIntervalo=60
tvRefresh=NRefresh the data every N seconds (minimum 60)&tvRefresh=300
tvRelogio=1 or 0Shows or hides the clock&tvRelogio=1

Full example: https://ingestia.io/d/abc123?tv=1&tvIntervalo=45&tvRelogio=1.

A big screen that's already filtered

Open the dashboard through the secret link, apply the filters (for example, only your store) and copy the address from the browser bar — it keeps the filters. Add &tv=1 at the end: the TV opens already filtered and starts rotating from the page that was open.

Where TV mode works#

  • On the secret link (/d/…) — the TV link.
  • On the dashboard published to the web (/painel/…): ?tv=1 works there too, and the old secret link carries the options along when it redirects.
  • It does not work inside the system (the dashboard screen with the menu) or on a dashboard embedded in another website (embed).

If something goes wrong#

What happenedWhat to do
Full screen didn't startBrowsers only enter full screen after a tap or click. Click ⛶ Full screen once.
The pages don't rotateThe dashboard has only one page, or the owner left only one checked in TV ▾.
A page appears empty on the big screenIt's a tooltip or drill-through page checked to rotate. The owner can uncheck it in TV ▾.
The numbers aren't changingCheck the data date on the dashboard. The TV refreshes at the configured interval (minimum 1 minute); the data source also needs to be refreshed.
"Too many requests in a row"The same link was opened many times in a short period. Wait and reload.
The link stopped workingThe owner generated a new link or took the dashboard offline. Ask for the TV link again.

Related#

Related links